PREDICTIVE DIALER MANUAL FOR SUPERVISORS

Read your topic about the phone number list
Post Reply
aliciarabin4
Posts: 1
Joined: Sat Oct 29, 2022 3:21 am

PREDICTIVE DIALER MANUAL FOR SUPERVISORS

Post by aliciarabin4 »

Summary of contents Cisco SPA512G Manual is a user guide that will help you perform the basic configuration of your terminal and show you how to get more out of its use by showing you how to make call transfers, conferences and much more. Everything you need to know, below! HOW TO INSTALL THE CISCO SPA512G? In this section of the Cisco SPA512G Manual we will show you everything you need to know to perform a correct installation of your terminal. WHAT ARE THE CISCO SPA512G CONNECTORS? cisco connectors In the following table we indicate what each of the connectors shown in the image is used for: # Description 1 Auxiliary port (For use with Cisco Attendant Console only) 2 Top slots.

Bottom slots 4 PC ports 5 Network port (switch). 6 Cables. 7 Headset port 8 Power port. (Use only with a Cisco PA100 power adapter.) HOW TO CONNECT THE HEADSET TO CISCO SPA512G? STEP 1 Turn over Phone Number List the body of the handset to expose the ports on the back of the device. STEP 2Insert the long end of the phone cable into the handset port on the phone body that is marked with a phone symbol. STEP 3 (Optional) Pass the telephone cable through the cable slot.. STEP 4 Insert the other end of the telephone cable into the port on the bottom of the handset (not shown). Desk stand or wall mount installation (optional). HOW TO INSTALL CISCO SPA512G IN DESKTOP OR WALL MOUNT MODE?

Image

The phone can be placed on a flat surface, such as a desk, or mounted on a wall. This section describes the installation of the desk stand. To mount the phone on the wall, you must use the MB100 wall mount bracket kit (available separately). Do not attach the desk stand if you intend to mount the phone on the wall. To mount the phone on the wall, follow the instructions included with the wall mount bracket. How To Install The Cisco SPA512G Desk Stand? STEP 1 Connect the phone base by aligning the tabs on the base with the slots on the phone body. STEP 2 Slide the bottom tabs into the bottom slots of the phone body and press down lightly on the cradle. It should slide easily into the slots on the top bracket.
Post Reply